Washer Won’t Drain

Home » Appliance service » Washer Won’t Drain
Washer Won’t Drain
Rate this post

Washer Won’t Drain

The parts or conditions listed below if the washer won’t drain   are ordered from most to least likely to occur. Dryer repair Miami and Broward.

washer don't drain

Commercial washer don’t drain

Cause 1 – Drain Pump

Small items or clothing can become trapped in the drain pump. To see whether the drain pump is being obstructed, remove the drain pump and check it obstructions. If there are no obstruction, but the drain pump still makes noises mid-cycle, then you must replace it. This is the main cause if the washer won’t drain fix Dryer repair  Miami  service.

Cause 2 – Clogged Pump or Hose

Small items or clothing can sometimes get inside the drain system and block the pump hose or the pump. Remove the hoses from the pump and examine them for any blockage. This is a high possibility if the washer won’t drain fix Dryer repair  Miami  service.

Cause 3 – Lid Switch Assembly

The lid switch assembly does not allow the washer to spin while the lid is open. When the lid switch assembly does not work, the washer will fail to drain. You can use a multimeter to test each of the lid switches for continuity in order to determine whether the lid switch assembly is has become defective. If a lid switch does not have continuity, then you must replace it.

Cause 4 – Door Lock and Motor Switch Assembly

The door lock keeps the washer door shut as the machine is running. If the door lock has become damaged, the washer door will not close properly. The door lock can fail mechanically or electrically. Examine the door lock for signs of damage. If it is damaged or does not close properly, then you must replace it. You can use a multimeter to test each of the door lock switches for continuity in order to see whether or not the door lock has failed electrically. If a switch does not have continuity, then you must replace it.

Cause 5 – Water Pump Belt

A few (mostly older) washing machines models come with a water pump belt. If the water pump belt has become damaged, then the washer will fail to drain. Examine the belt and change it if it there are signs of serious damage.

Cause 6 – Drain Hose

Examine the drain hose to see whether it is twisted, bent, or otherwise damaged. If the drain hose is bent, then you can simply straighten it. You must also remove the drain hose and examine it for any blockages. If there are any blockages, then remove them. If the hose is too damaged, then you must replace it.

Cause 7 – Coin Trap

A few washers come with a coin trap to catch any objects that come into the drain. The coin trap should be cleaned from time to time. The coin trap will eventually get clogged as debris and other objects accumulate with time, preventing the washer from draining. Provided that the washer has a coin trap, if it will not drain or is not draining properly, you must remove and clean the coin trap.

Cause 8 – Door Lock

Check the door strike assembly for signs of damage. If the door strike is broken, then you must replace it, as unfortunately it cannot be repaired. This is a low possibility if the washer won’t drain fix Dryer repair  Miami  service.

These are the possible causes if the washer won’t drain

Page Up

Main page

 
 

Tags: , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

 

Featured Pages Slider

Featured reviews

All Reviews +