Home » Service »
Rate this post

Bosch washer mistakes Codes for NEXXT fashions

those error code factors can help you diagnose a hassle with your Bosch NEXXT washing machine. For repair how-to help, visit the PartsDirect restore help section, which incorporates restore help for washing machines, other main appliances, lawn and lawn device, storage door openers, vacuum cleaners and more. you may additionally search for owner’s manuals and find washing machine alternative elements.

test out our washing machine blunders code charts for data on a unique emblem of washer.

blunders Code circumstance check/repair store elements
Er:01 Door is open Unplug the washing machine and reconnect any unfastened wires at the door lock assembly wire harness. update the cord harness if damaged. If the cord connections are k, update the door lock meeting.
Door lock meeting
Er:04 Door lock relay might not prompt Unplug the washing machine for three mins to reset the manipulate module. If the code returns when you plug it returned in, update the manipulate module.
manage module
Er:05 and Er:06 Water temperature sensor is defective Unplug the washer and reconnect any unfastened wires at the water temperature sensor (also referred to as the bad temperature coefficient, or NTC). update the cord harness if damaged. If the cord connections are k, update the water temperature sensor.
Water temperature sensor (NTC)
Er:07 sudden heating (water heats up without the manage module activating the heater) Unplug the washing machine and take a look at the heater for visible damage. A damaged heater will be shorting out to the metal cupboard, inflicting the element to heat continuously. replace the heater if damaged. If the heater is okay, replace the control module due to the fact the relay that controls the heater is likely stuck in the On role.
Heater, manage module
Er:08 Heating time exceeded (heater doesn’t turn off) Unplug the washer and check the heater for seen harm. A damaged heater will be shorting out to the metallic cabinet, inflicting the detail to warmth constantly. replace the heater if broken. If the heater is k, replace the manipulate module due to the fact the relay that controls the heater is probably stuck inside the On function.
Heater, manage module
Er:09 No verbal exchange between manipulate module and motor manipulate module Unplug the washing machine and reconnect any free wires on the control module and the motor manipulate module. If the connections are k, update the twine harness. If the hassle persists, update the motor manipulate module. In a few instances, the primary control module additionally have to get replaced.
wire harness, Motor manipulate module, control module
Er:eleven and Er:12 Water fill time surpassed make sure that each water deliver valves behind the washing machine are fully open. In winter, check the fill lines for freezing. check the drain machine for a siphon trouble. If the water inlet valve assembly is defective, update it.
Water inlet valve assembly
Er:thirteen Drain time handed eliminate any clogs from the house drain for the washing machine. cast off any clogs or kinks from the washer drain hose. Unplug the washer and check the massive-item filter out within the drain pump for a clog. If the drain pump is faulty, replace it.
Drain pump
Er:14 Overfill stage reached If the washer is not overfilled, the water stage strain transfer is in all likelihood faulty and could need to be replaced. If the washing machine is overfilled, shut off the water deliver taps in the back of the washing machine. The drain pump runs constantly whilst this code is displayed and ought to pump out the water. Unplug the washer and open the water deliver valves. If the washer fills when the electric strength is disconnected, replace the water inlet valve meeting.
Water inlet valve assembly, Water degree strain switch
Er:17 Aquastop error The Aquastop flow transfer in the base of the washing machine cupboard trips if water leaks into the bottom of the washer cupboard. Unplug the washing machine and test for water within the base of the cupboard. If water is gift, restore the source of the leaking. If the bottom of the cabinet is dry, take a look at for a foreign item stuck beneath the drift switch. If the Aquastop go with the flow transfer is defective, replace it.
Aquastop glide transfer
Er:20 Spin cycle terminated both the spin cycle ended because of a seriously unbalanced load or verbal exchange became misplaced between the motor control module and the main control module. If the weight become unbalanced, manually balance the burden and take away some items to lessen the size of the burden. If the washer still might not spin, unplug the washer and reconnect any loose wires on the manage module and the motor control module. replace the cord harness if broken. If the wire harness connections are k, update the motor manipulate module. If the trouble persists, update the manipulate module.
twine harness, manage module, Motor control module
Er:21 excessive foam detected Use the proper quantity of excessive-efficiency (HE) detergent inside the washer. most hundreds want most effective 1 tablespoon of HE detergent due to the decreased water degree on this front-load washer.
HE detergent
Er:22 electrical strength supply hassle ensure the strength cord for the washer is plugged in. in that case, take a look at the electrical outlet by means of plugging in a lamp or small appliance. If the electrical outlet doesn’t work, have an electrician repair the opening. If the hole works, unplug the washer and reconnect any unfastened wires on the manipulate module. If the electricity twine or outlet plug is broken, update it.
electrical energy twine
Er:25 Door lock is blocked The door lock coil overheated because of repeated tries to fasten or release the door. test the door lock meeting for harm or a overseas object stuck in the locking mechanism. If the door lock meeting is broken, update it.
Door lock assembly