Amana Dryer Error Codes | AppliancesCare

Found Your Error Code?

Our technicians serve Miami, Hialeah, Doral, and surrounding areas — same day. Call now for fast diagnosis and repair.

📞 Call (786) 587-0722

📋 Error Code Index — Amana Dryer

F3E1 Inlet Thermistor Fault F3E2 Outlet Thermistor Fault F4E4 Heating Element Open Circuit

F3E1

Inlet Thermistor Fault

Inlet air temperature sensor open circuit or reading outside expected operating range.

Medium Priority

Possible Causes
Thermistor failed open or shorted internally
Connector to thermistor loose or corroded
Diagnostic Steps
1Inspect thermistor connector for corrosion or loose fit
2Test thermistor resistance — value should decrease as temperature increases
3Replace inlet thermistor if reading is open (OL) or near zero ohms

F3E2

Outlet Thermistor Fault

Outlet air temperature sensor open circuit or reading outside expected operating range.

Medium Priority

Possible Causes
Thermistor failed open or shorted internally
Connector to thermistor loose or corroded
Diagnostic Steps
1Inspect thermistor connector for corrosion or loose fit
2Test thermistor resistance — value should decrease as temperature increases
3Replace outlet thermistor if reading is open (OL) or near zero ohms

F4E4

Heating Element Open Circuit

Heating element detected as open circuit — dryer operates but produces no heat.

Medium Priority

Possible Causes
Heating element coil burned out — open circuit
Element wiring connection open or terminal corroded
Diagnostic Steps
1Test heating element for continuity — OL reading confirms open circuit
2Inspect element terminals and wiring connections for damage
3Replace heating element if open circuit confirmed

Need a Technician in Miami or Hialeah?

AppliancesCare provides same-day Amana dryer repair across Miami-Dade. Bilingual service — English & Spanish.

📞 Call (786) 587-0722

Important Notice: Dryer repair involves high-voltage components and hot surfaces. The diagnostic information provided here is based on Amana manufacturer technical documentation. Actual fault causes may vary by model. Always disconnect power before servicing. Consult a certified technician for electrical faults. AppliancesCare Appliance Repair LLC provides this information for educational purposes only.